Skip to main content

Operations with Aggregator Process

This section describes basic operations which can be performed with already created aggregator processes.

Delete Aggregator Process​

To delete existing aggregator process perform the following steps:

  1. Right-click the Aggregator box and select Edit Processes.
  2. Right-click the block with existing process and select Delete.
  3. Click Apply to confirm. Aggregator process as well as xml configuration file from QSHome\config\aggregator folder will be deleted.

Edit Aggregator Process​

To edit existing configuration of aggregator process perform the following steps:

  1. Right-click the Aggregator box and select Edit Processes.
  2. Right-click the block with existing process and select Edit.
  1. Proceed through the Data Connector Wizard and change required settings.
  2. Complete the process configuration by selecting Finish and Apply.

Export Aggregator Process​

To export existing configuration of aggregator process to xml file perform the following steps:

  1. Right-click the Aggregator box and select Edit Processes.
  2. Right-click the block with existing process and select Export.
  1. Select a folder, enter file name and click Save.

Import Aggregator Process​

To import aggregator process configuration from existing xml file perform the following steps:

  1. Right-click the Aggregator box and select Edit Processes.
  2. Select Import.
  1. Select xml file with aggregator process configuration and click Open.
  2. Proceed through Data Connector Wizard and change aggregator process settings if needed.
  3. Complete the process configuration by selecting Finish and Apply.